TOP LINE VACUUM DEVICE FOR VINYL POOL

Model Min Flow - Max m³/h Tubo
Aspiration Top Line in ABS 0 – 9 1.1 / 2 "
ROI Top Line ABS 2,2 – 6,6 1.1 / 2 "
Wave Breaker Top Line ABS 0 – 1,2 1.1 / 2 "
hidromassagem Top line ABS 3,4 – 7,9 1.1 / 2 "

TOP LINE VACUUM DEVICE FOR VINYL POOL

For swimming pools, the suction devices have a fundamental function, being responsible for capturing the water from the pool, directing it to the filtering system, in addition to being the main point for coupling the hose, which, connected to the vacuum cleaner, will carry out the cleaning operation at the bottom of the pool. . Its installation must be positioned 20 to 40 cm below the water level. The location and distribution of the suction devices must be done in a way that allows the access of the vacuum to all points of the pool bottom. (according to ABNT standard n.º NBR 10.339). We can establish as a reference, whether to install the suction device in the center of the largest wall, taking into account the size of the pool for the dimensioning of the quantity.

TOP LINE RETURN DEVICE FOR VINYL POOL

As well as the suction device, the return device also has an important role in the construction of a swimming pool, since through it the water already processed in the filter system is returned to the pool, in addition to producing a flow of water towards the strainer. (skimmer) and to the bottom drain or anti-vortex, promoting the equalized movement of water, contributing to its better oxygenation, and still having the role of homogenization; that is, uniform distribution of the mixture of chemicals used in the treatment of the pool water.

TOP LINE DRAIN FOR VINYL SWIMMING POOLS

When installing the Quebra Onda Pratic drain, it must be positioned so that the water blade is centered on the piece, thus avoiding overflowing the pool. The device is made to fit into 50mm tubing

TOP LINE HYDRO DEVICE FOR VINYL POOLS

Developed for vinyl pools, they are made of injected thermoplastic (ABS).
For vinyl pools, the standard or top line models (with brass inserts) are indicated. They have a directional jet that can be adjusted within a 25º angle starting from the center, outlet for coupling the pipe of 40 mm of glueable diameter and external diameter of 50 mm, allowing the connection of sleeve to pipe of 50 mm. There are also hydrosuction devices (DHS CR ) produced in ABS, which together with the hydro-massage devices, complete the cycle of water flow in the bathtub or swimming pool.